Power Industry Webinar Production & Promotion

Optimizing CO and VOC Oxidation for Gas Turbine Power Generation

Cormetech_Logo_Optimal+and+Beneficial+SCR+Catalyst+Design+For+SCR+Applications.jpg

Topics presented in the webinar will include:

  • Introduction of CORMETECH METEOR™ M3 - specifically applied for CO and VOC oxidation, providing broad capability to operate at low gas turbine loads while maintaining CO emission compliance and fast compliance with CO emissions during unit startup.  

  • Broader GT load flexibility by keeping CO emissions in compliance at low load and a reduced sensitivity to sulfur fouling agents when operating at low temperature (for new and existing units).

  • CORMETECH METEOR™ M1 for simultaneous reduction in CO, VOCs, NOx and ammonia to meet multiple compliance requirements in a single catalyst layer located at the traditional SCR catalyst location.

  • Long-term durability of catalysts evaluated under simulated aging conditions in the lab and under real conditions in the field.

  • Field and laboratory validation of catalyst performance in achieving reduction in NOx and oxidation of CO and VOC

CORMETECH’s METEOR™ technology provides a family of catalysts customizable for any application- M1 (NOx reduction plus CO/VOC Oxidation), M2 (ammonia slip control) and M3 (CO/VOC Oxidation). 

Below are some of the questions discussed during the webinar:

  • Can the M3 product be designed and built to replace a traditional CO panel?

  • What are some real-world expectations about the benefit of the M1 product vs. a traditional two-catalyst bed system?

  • Can the METEOR catalyst products be recycled like traditional CO or SCR catalysts? Would Cormetech accept them during replacement for a credit toward replacement catalysts?

  • What is the recommended flue gas temperature to locate the COVOC catalyst?

  • What is the catalyst's formaldehyde removal capability?